Enviromental Security Wires

Absolute Pro

  • Technology : Bi-directional IR beams + Microwave
  • Range : 50 - 200 mt.
  • Alarm OUT: TCP/IP, Modbus TCP or Dry contacts
  • Applications: Industrial, Military, Governmental

ABSOLUTE PRO™ perimeter intrusion detection system (PIDS) is a high security IP based modular Dual Technology barrier that combines unique new digital bi-directional with optical synchronization IR beam and digital microwave technologies within one unit. Developed for long range outdoor surveillances (up to 200m coverage between transmitter and receiver unit) for high risk areas located in critical environments where conventional technologies fail to grant continuous proper operations, ABSOLUTE PRO™ is the unique active barrier able to properly keep a high security degree during thick fog, heavy rain, strong snowfalls and sandstorms times. The system provides for maximum reliability of intruder detection with minimum false alarms and can be custom designed to any height and component array suiting each security requirement.

Without any additional interface, ABSOLUTE PRO™ barriers can be easily integrated into existent or new IP backbone networks virtually in any locations. Advantages of IP network solutions include remote accessibility for system maintenance and diagnostic, easy connection, better scalability, flexibility and installation cost-effectiveness.

TDA - TARGET DIRECTION ANALYSIS

ABSOLUTE PRO™ provides not only simple alarm information but even target direction (IN or OUT) information which makes target tracking with perimeter CCTV cameras easier and more accurate. Directions can be filtered according to client requirments and internal security procedures.

5-DS - 5 DETECTION SCENARIOS

Being each IR beam inside ABSOLUTE PRO™ equipped with a microprocessor, individual crossing parameters can be set and up to 5 multiple intrusion detection scenarios can be configured for better filtering nuisance alarms caused by random animal activities such as flying birds and small/medium wilde animals keeping a high capability of real intrusions detection.

SEA - SIGNAL EFFICIENCY ANALYSIS

An other key innovation in ABSOLUTE PRO™ is the introduction of the Signal Efficiency Analysis (SEA), a predictive maintenance tool which continuously monitors the optical communication stability and efficiency of each IR beam alerting security operators when the system requires a maintenance inspection. SEA as an instance set off when columns front cover accumulation of dirt has reached critical levels or when IR beam modules are close to end of their life.

IR BEAM REMOTE MANAGEMENT

ABSOLUTE PRO™ can adapt itself to any drastic environmental changing such as big snow falls, growing grass or sand storms by simply disabling without additional wire connections from the control room those IR beams temporally covered by high layer of snow or sand preserving its high capability of detection.

ODC - OPTICAL DATA CHECK

Data communication between ABSOLUTE PRO™ Slave (TX) and Master (RX) units are optical and do not require any SYNC cable which makes installation procedures longer and costly. The safety of the optical data transmission is guaranteed by a continuous regeneration of specific codes protected with checksums.

Avantgarde

  • Technology : Optical synchronized IR Beams
  • Range : 200 mt.
  • Alarm OUT: TCP/IP, Modbus TCP or Dry contacts
  • Applications: Industrial, Residential, Governmental, Military

AVANTGARDE™ is a high security fully digital modular IR beam barrier designed for long range outdoor surveillance (up to 200m coverage between transmitter and receiver unit). It is characterized by the implementation of SICURIT’s unique new bi-directional with optical synchronization IR beams stacked in discrete rugged extruded aluminum columns.

At the heart of the barrier Is the intelligence built into each IR beam in turn interfaced towards an internal analysis unit which is able to manage up to 18 IR beams stacked into up to 6m columns.

Without any additional interface, AVANTGARDE™ barriers can be easily integrated into existent or new IP backbone networks virtually in any locations. Advantages of IP network solutions include remote accessibility for system maintenance and diagnostic, easy connection, better scalability, flexibility and installation cost-effectiveness.

TDA - TARGET DIRECTION ANALYSIS

AVANTGARDE™ provides not only simple alarm information but even target direction (IN or OUT) information which makes target tracking with perimeter CCTV cameras easier and more accurate. Directions can be filtered according to client requirments and internal security procedures.

5-DS - 5 DETECTION SCENARIOS

Being each IR beam inside AVANTGARDE™ equipped with a microprocessor, individual crossing parameters can be set and up to 5 multiple intrusion detection scenarios can be configured for better filtering nuisance alarms caused by random animal activities such as flying birds and small/medium wilde animals keeping a high capability of real intrusions detection.

SEA - SIGNAL EFFICIENCY ANALYSIS

An other key innovation in AVANTGARDE™ is the introduction of the Signal Efficiency Analysis (SEA), a predictive maintenance tool which continuously monitors the optical communication stability and efficiency of each IR beam alerting security operators when the system requires a maintenance inspection. SEA as an instance set off when columns front cover accumulation of dirt has reached critical levels or when IR beam modules are close to end of their life.

IR BEAM REMOTE MANAGEMENT

AVANTGARDE™ can adapt itself to any drastic environmental changing such as big snow falls, growing grass or sand storms by simply disabling without additional wire connections from the control room those IR beams temporally covered by high layer of snow or sand preserving its high capability of detection.

ODC - OPTICAL DATA CHECK

Data communication between AVANTGARDE™ Slave (TX) and Master (RX) units are optical and do not require any SYNC cable which makes installation procedures longer and costly. The safety of the optical data transmission is guaranteed by a continuous regeneration of specific codes protected with checksums.

Hyper Power

  • Technology : Hardware + Software solution
  • Applications: Industrial, Military, Governmental, Residential

The security of sensitive areas (government offices, industrial sites, military zones, prisons, stadiums, banks, ports, airports, railway stations, metro stations) is vital to safeguard personal safety and protect environments, systems, information and data inside these areas. Recent history teaches us that electronic protection systems aren’t only a precautionary measure, but an effective tool for preventing and deterring criminal acts.

HyperPower integrated security platform, combined with SICURIT unique perimeter protection systems, represent SICURIT respond to increasingly demanding of high security requirements.

Based on client/server architectures, comprising hardware and software subsystems in which digitalized alarms and operator commands are transmitted over an IP network and/or serial lines, HyperPower is a highly scalable system, without topological limitations, that can be adapted to diverse operating scenarios (perimeter security management, total security management, building management system etc.).

Through proprietary IP and Serial interfaces HyperPower is able to integrate concentrate and manage not only SICURIT but even third party systems thanks to its open architecture structure which allows fast implementation of third party DSK’s development kits.

Dave

  • Technology : Microwave
  • Range : 50 - 120 - 200 mt.
  • Alarm OUT: Contact relay and/or RS-485
  • Applications: Industrial, Commercial, Residential

SICURIT Digital Microwave intrusion link DAVE represents a further technological step forward in outdoor perimeter protections.

It has been designed for quick and easy installation and it is suitable for any kind of environment that requires medium-high security standards.

Advanced digital signal processing (DSP) strongly increases detection accuracy and enables to discriminate unwanted targets with more precision compare to traditional analogue microwaves.

OPERATION

Intrusion detection, using a modulated amplitude sensitive system, takes place within the invisible pattern of microwave energy existing between transmitter and receiver. Changes of signal amplitude at the receiver are directly related to the object’s size, speed and density, allowing the sensor to discriminate between objects.

Peridect

  • Technology : Piezoelettric sensor
  • Range : Up to 740 m. per unit
  • Alarm OUT: Relay Contact
  • Applications: Industrial, Military, Governmental

The PERIDECT® system detects vibrations on the fencing caused mechanically during attempts to enter the premises (climbing over, cutting through, lifting off). Sensors are arranged on the fencing for such detection (usually one detector (FENSEN10) per fence panel between posts). Each detector contains a piezoelectric element supported by microprocessorbased signal processing.

Using a differential logic, the system considerably suppresses false alarms caused by weather effects (rain, wind). The system provides detection accuracy enabling each individual detection sensor FENSEN10, to be viewed on the control system as one zone, while the parameters of any sensor can be set independently.

One single evaluation unit (FENCEN) can typically be used for approx. 740 m. (246 sensors limitation) of fencing with resolution of unauthorised entry for each 2.5 m fence panel assuming one detector per panel. The PERIDECT® system is fully autonomous with fully configurable features and alarm outputs allowing the PERIDECT® system to be connected to a standard security system as a regular detector. The PERIDECT® system is in addition equipped with an input/output module to simply connect other devices on the perimeter route (e.g. magnetic contacts on gates) into the system as well as controlling other devices (e.g. spotlights).

SYSTEM ELEMENTS

The PERIDECT® system consists of an evaluation unit (FENCEN), to which detection sensors (FENSEN10) and input/output modules (FENSEN15), are connected using a data cable.

Each FENCEN can be connected to up to 246 detection sensors (FENSEN10) and 8 input/output modules (FENSEN15).

DETECTION SENSOR (FENSEN10)

The detection sensor evaluates mechanical vibrations from the fencing using a piezoelectric sensor (ensuring long-term durability and repeatability). It is located in a plastic box and attached to the fencing by two screws and a plastic strap. It is fitted as standard in the middle of the fence panel between the post supports.

The manufacturer connects individual sensors using a bus cable with spacing according to actual conditions that the installer must specify.

TECHNICAL FEATURES

  • Exact location of the intrusion (2-4m)
  • Very low nuisance alarm rate caused by weather using unique DIFFERENTIAL LOGIC
  • Simple architecture and easy installation
  • Independent setting up of individual detectors
  • Operating temperature range: -55 °C to +85 °C
  • Long operating life, no movable components
  • Simple integration with electronic security systems (CCTV, etc.), affordable graphic visualization program
  • Simple setting up of the system locally and remotely
  • Capability to control other devices on the detection line

SicurFlex

  • Technology : Vibro and Tribo sensor cable
  • Range : 500 mt. per unit.
  • Alarm OUT: Relay Contact
  • Applications: Industrial, Governmental, Residential

The SICURFLEX perimeter protection system provides reliable and cost effective solution for protecting properties from unauthorised intrusions.

Developed for the recent demand for cost-effective solutions for the protection of solar parks as well as photovoltaic frames, SICURFLEX can be employed in many different applications and can be installed on any type of fence available on the market.

HOW IT WORKS

The system operates by means of a sensor cable (FLEXCB), which is mounted all along a perimeter fence (or photovoltaic frame): An electrical signal in response to movement or deformation of the cable will generate, within the desired threshold level, an alarm condition.

WallGuard

  • Technology : Sensor cable
  • Range : 250 meters
  • Alarm OUT: Dry Contact
  • Applications: Warehouses - Logistic depots - Data centers

BREAK THROUGH DETECTOR

Wallguard has been specifically developed for the protection of sensitive buildings and boundary walls that could be breached by means of breakthrough attempts. This solution results very effective against nuisance alarms that could be caused by environmental factors (wildlife activities, harsh weather conditions) as well as nearby heavy movements typical of industrial areas. Wallguard operates by means of a sensor cable (FLEXCBVB) that can be mounted on walls or drowned in it remaining completely invisible to the human eye. The sensor cable is then connected every 250m to an Analysis Unit (FLCENKITVB) mounted in a IP65 external box equipped with built-in power supply. An additional 250m zone (reaching 500m protection within 1 connection point) can be set up by adding a second analysis unit FLCENAN.

NO sensitive zones (equal to 10% of the installed sensor cable) can be created in proximity to doors/gates by adding special Junction units connected with standard RG59 cable. Wallguard detection principle is based on sensor vibration analysis able to properly filter nuisances which could be caused by nearby heavy track movements, thunders or any animal activity.

One single evaluation unit (FENCEN) can typically be used for approx. 740 m. (246 sensors limitation) of fencing with resolution of unauthorised entry for each 2.5 m fence panel assuming one detector per panel. The PERIDECT® system is fully autonomous with fully configurable features and alarm outputs allowing the PERIDECT® system to be connected to a standard security system as a regular detector. The PERIDECT® system is in addition equipped with an input/output module to simply connect other devices on the perimeter route (e.g. magnetic contacts on gates) into the system as well as controlling other devices (e.g. spotlights).

TECHNICAL FEATURES

  • Product code: FLCENKITVB
  • Power supply: 12VDC
  • Consumption: 5mA
  • Working temperature: -40°C / +80°C
  • Max umidity at 35°C: 98%
  • Alarm output: Dry Contact
  • Tamper output: Dry Contact
  • Housing dimensions (mm): 90 x 146 x 45 (l x h x d)
  • Housing: IP65
  • Weight (approx): 5,0 Kg.

Infratronic

  • Technology : Passive IR
  • Range : 150 mt
  • Alarm OUT: Contact relay
  • Applications: Industrial, Residential

Long-range Passive Infrared Detector (PIR) has been developed for detection of intruders up to 150 meters. Can be used when the installation of traditional active infrared beams is difficult or impossible. Moreover the area protected cannot be identified by an intruder due to the passive operation of the unit.

OPERATION

Infratronic is a passive device designed to detect any intruder by his movement due to the infrared contrast against the background. Two curtains sensing areas provide the alarm only when they detect infrared radiation emitted by a human body entering in the first curtain and leaving the second one. The detection algorithm eliminates slow temperature changes and avoid nuisance alarm caused by small animals, flying birds and moving vegetation. Since Infratronic only reacts to infrared radiation, they can be used during day&night as well as under changing climatic conditions such as fog, rain and snow. For the installation, a robust IP65 weatherproof aluminium housing is supplied with his bracket.

APPLICATIONS

Usefull for the protection of large buildings and long walls as well as combined with CCTV systems and Video Motion Detectors (VMD).

Beam Fence

  • Technology : Infrared beams
  • 30 m.
  • Alarm OUT: Contact relay
  • Applications: Governmental, Industrial, Residential

Midi patented bi-directional infrared beam barriers for the protection of industrial buildings, long balconies and corridors.

It is made up of two microprocessor logic circuits mounted with the SMD technique which manages up to 8 pairs of optical circuits within up to 3 meters aluminium pillars. Optics are multiplexed, and the alarm sounds when two optics are obscured (AND function). Maximum outdoor range 30 meters.

OPERATION

Transmitters and Receivers are crossover mounted on both pillars, allowing at least one beam to work when the other is obscured by sunlight. The installation of Beam Fence is very simple due to the automatic detection and setup of the beams, you can add additional beams to the system (BSN050HS) and the microprocessor logic automatically recognize them with no need of any setup procedure.

CODES AND TECHNICAL FEATURES

CODES BSN150HS BSN200HS BSN250HS BSN300HS
RANGE 30 m. (outdoor) - 60 m. (indoor)
PILLAR HEIGHT 1,5 m. 2,0 m. 2,5 m. 3,0 m.
MAX NUM. OF BEAMS 8
OPTICAL LENS Policarbonate Fresnel lens (18 mm diameter)
OPTICAL COMMUNICATION Bi-directional + Synchronization (by wire)
BEAM INTERRUPTION TIME 80 - 200 msec.
ALARM OUTPUT 1 Contact Relay (C/NC) + 1 Tamper Switch (C/NC)
POWER SUPPLY 12 VDC
MAXIMUM CONSUMPTION 120mA (TX + RX)
OPERATING TEMPERATURE -25° + 70°C
DIMENSIONS 50 x 35 x (H) mm (W x D x H)
HOUSING Aluminium extruded
Quick Contact
Please wait.. E-mail is wrong. * marked fields are required. Your message has been sent succesfully. An error occured, please try again.
Adil Mh. Demokrasi Cd. No:19 PK: 34935
Sultanbeyli, İstanbul / Türkiye
CUSTOMER SUPPORT

You can reach us for demands,
questions, remark, and evaluation
about our products at any time.

To reach customer support
click!